How To Clean Golf Club Heads?


How To Clean Golf Club Heads:

  • Use a towel to remove any dirt from the club head.
  • Use a club brush to remove any dirt and debris from the grooves on the face of your clubs.
  • Use an anti-corrosion compound if you want extra protection for your new golf club heads!
  • Clean under the grooves with cotton swabs (the stiffer ones work best), then dry them off with towels so that no moisture remains in those parts where moisture could corrode metal parts over time.

Steps To Clean Golf Club Heads:

Gather Your Supplies:

You will need a clean towel, a club brush, and cotton swabs. Anti-corrosion compound is also useful if you want to keep the club head from rusting in the future.

Remove Any Excess Debris Or Dirt:

When you’re done cleaning, use a clean towel to wipe off any excess debris or dirt. The best way to do this is by moving the club head from side to side and back again, but make sure that you don’t just move it around. Instead, make sure you are using your dampened towels on each individual club head until all surfaces are clean.

After removing your clubs from the water, dry them off with an old towel or handkerchief (or even better yet a new one). This will help keep them from rusting over time and helps prevent water damage during storage if there were any spots left behind when washing off with soap and water earlier in this process!

Clear The Club Heads:

The club brush is the most important tool to use when cleaning golf clubs. It’s also the most overlooked and under-utilized tool in your arsenal.

Use this brush in a circular motion, taking care not to press too hard on any part of your head as you go around it. Don’t use a steel or wire brush, they’ll damage the surface of your clubs, which will affect their performance over time.

Clean The Grooves In The Club Head:

To clean the grooves in your club head, you’ll need a cotton swab. A soft cotton swab is best, but if you don’t have one available and are pressed for time, then a firm but gentle pressure will do just fine.

Once you have your swab ready to go (or already have one), take it out and wipe down each groove on your golf club head with light pressure from start to finish so that there are no streaks left behind when finished. Repeat until all of them are clean!

Clean Out All The Dirt From Under The Grooves:

To clean the grooves, use a cotton swab. You can also use a toothpick if you have one on hand. Do not use too much force and make sure not to damage the club head by scrubbing too hard.

Apply An Anti-Corrosion Compound To The Club Heads:

The anti-corrosion compound is a mixture of chemicals and oils. It’s typically applied to the club heads with a cotton swab, but you can also use an applicator brush or foam tip applicator (like those used for applying paint).

Make sure you don’t get any of the product on your grip or shaft, as this will affect playability and appearance. Do not apply too much just enough to coat all surfaces of the head and shaft evenly.

If you’re worried about overspray getting onto another part of your golf equipment, put down some newspaper before applying so that any excess drips off easily into an area away from where they’ll be touched when playing golf later on!

Wipe Off Any Excess Cleaner:

Once you’ve cleaned the club head, use your towel to wipe off any excess cleaner. This will help prevent dirt from getting into the grooves of your club head and causing damage when you hit balls with it later on.

If there’s still some cleaner left on your towel after wiping off all of that excess, just hang it up somewhere so that air can get under it and dry out any residual moisture (which could be damaging).

Dry The Grooves Completely:

Use a clean cotton swab to dry the grooves completely. Make sure to dry out all the dirt and grime that you can see on your club head, but don’t use any paper towels or clothes as they can leave lint on the club head.

How To Clean The Head Of A Golf Driver?

Cleaning your golf club head is actually pretty simple. You can use a damp cloth, or you can also use an old toothbrush and some soapy water.

  • Wipe down the grooves of your shaft with a damp cloth to remove dirt and debris that may have accumulated there over time. Make sure you don’t get any water into those grooves because they’re designed to be sealed off from moisture in order to allow proper swing weight distribution during play.
  • If you want a more thorough cleaning of your shaft’s grooves, then use either an old toothbrush or cotton swab dipped in some mild soap solution (such as dishwashing liquid). Make sure no dirt gets on the finished surface by making sure all parts are clean before moving on to step 3 below!

How To Clean Golf Club Head Covers?

  • Remove the covers.
  • Clean the covers with a soft cloth.
  • Use a dry cleaning solution, such as a window cleaner, to remove any dirt and grime from your clubs. Water can also be used if you don’t have access to special cleaners or you’d prefer not to use chemicals on your clubs (or if they’re still new).
  • Rinse off all residue using fresh water before drying off with a clean towel


Your club heads are one of the most important parts of your golf game. They’re what makes a solid shot possible and help you do well at tournaments. So, if you want to keep them clean and in good shape, follow these tips from our experts!

Leave a Comment